NVSR vs NVTF

General help and troubleshooting.
Post Reply
lazynick
Posts: 62
Joined: Wed Jan 27, 2016 2:33 pm

NVSR vs NVTF

Post by lazynick » Wed Jul 03, 2019 4:16 pm

i had a similar problem but my main menu loaded half the times i started the game, i also have awop but i think the problem for me was stutter remover when i switched to nvtf it stopped. windows 10 1903

UsagiPyon
Posts: 118
Joined: Thu Jan 17, 2019 4:09 pm

Re: TTW 3.2 with AWOP - No main menu text

Post by UsagiPyon » Thu Jul 04, 2019 7:56 am

lazynick wrote:
Wed Jul 03, 2019 4:16 pm
i had a similar problem but my main menu loaded half the times i started the game, i also have awop but i think the problem for me was stutter remover when i switched to nvtf it stopped. windows 10 1903
It should not be NVSR problem unless you have configured it wrongly (Configuration was covered in faq). and I tried both NVSR and NVTF in Windows 10.

lazynick
Posts: 62
Joined: Wed Jan 27, 2016 2:33 pm

Re: TTW 3.2 with AWOP - No main menu text

Post by lazynick » Thu Jul 04, 2019 3:58 pm

i have the recommended ini for nvsr and i observed that when the game loads it behaves differently between nvsr and nvtf. with nvtf the cursor appears after the engine loads the background processes with nvsr the cursor appears sooner and sometimes the game hangs. with nvtf the main menu loading more is consistent but in game the game runs smoother with nvsr.

UsagiPyon
Posts: 118
Joined: Thu Jan 17, 2019 4:09 pm

Re: TTW 3.2 with AWOP - No main menu text

Post by UsagiPyon » Thu Jul 04, 2019 8:49 pm

lazynick wrote:
Thu Jul 04, 2019 3:58 pm
i have the recommended ini for nvsr and i observed that when the game loads it behaves differently between nvsr and nvtf. with nvtf the cursor appears after the engine loads the background processes with nvsr the cursor appears sooner and sometimes the game hangs. with nvtf the main menu loading more is consistent but in game the game runs smoother with nvsr.
If NVTF works better for you then all the best (๑•̀ㅂ•́)و✧

lazynick
Posts: 62
Joined: Wed Jan 27, 2016 2:33 pm

Re: TTW 3.2 with AWOP - No main menu text

Post by lazynick » Thu Jul 04, 2019 10:06 pm

hell no :P i said it just has more stable main menu... in game nvtf for me is doing nothing, nvsr on the other hand is very very good :D

UsagiPyon
Posts: 118
Joined: Thu Jan 17, 2019 4:09 pm

Re: TTW 3.2 with AWOP - No main menu text

Post by UsagiPyon » Sat Jul 06, 2019 2:07 pm

lazynick wrote:
Thu Jul 04, 2019 10:06 pm
hell no :P i said it just has more stable main menu... in game nvtf for me is doing nothing, nvsr on the other hand is very very good :D
The only time my main menu hangs was because of badly converted/incompatible mods, badly made patch and erroneous configuration in NVSR. I have also compared the performance between NVSR and NVTF and there isn't a big difference on the menu and ingame. Well, could be our hardware differences but I'm using a potato PC.

lazynick
Posts: 62
Joined: Wed Jan 27, 2016 2:33 pm

Re: NVSR vs NVTF

Post by lazynick » Sat Jul 06, 2019 2:56 pm

it depends on the ini settings i started messing with them and i get different results at different settings if i follow 100% the guide from the faq here on ttw i get rock solid game stable main menu but in game i have more stutters due to the fact that critical sections is off. but if i mess with some settings and enable experimental stuff my game sometimes hangs on loading or opening the pip boy but the performance is noticeably better. i wish the author of nvsr returned and patched it for windows 10.

Vilgoth
Posts: 1
Joined: Sun Jun 23, 2019 11:58 pm

Re: NVSR vs NVTF

Post by Vilgoth » Sun Jul 07, 2019 10:01 pm

I had loads of trouble with NVSR, crashes, freezes, etc. I was getting pretty despondent considering the amount of hours put into this build.

Then I switched to NVTF and voila! No more crashes or freezes, even on outdoor cells. Mind you, there is some slight stuttering, but I will gladly take that over the crashes and freezes.

lazynick
Posts: 62
Joined: Wed Jan 27, 2016 2:33 pm

Re: NVSR vs NVTF

Post by lazynick » Mon Jul 08, 2019 11:01 am

bFastResolution=0 this setting was added on nvtf anyone knows what is for ?

User avatar
RoyBatty
Posts: 6433
Joined: Sun Apr 27, 2014 10:26 am
Location: Vault 108

Re: NVSR vs NVTF

Post by RoyBatty » Tue Jul 09, 2019 2:56 am

Turn it on, I do to make it work correctly.
Image

Post Reply